Back • Air Throttle • Gear Sleeve • Stone Bennett Shifters • Design

Stone Bennett

Stone Bennett is now consolidated with Froude Consine Inc.

Froude Consine

Trust your transmission shift control requirements to over three decades of experience by requesting the proven Bennett Shift Control. The Bennett Shift Control positions the transmission selector shaft by air pressure precisely as the transmission manufacturer intended and provides positive feedback to the driver for range indication.

Why Bennett Controls?

- Reduce Transmission Overhauls
- Longer Transmission Life - Protect Your Equipment - Eliminate cable control and periodic adjustments.
- Air powered units are easy to maintain and install, light weight and are economically priced.

- The Bennett Control is ALLISON APPROVED and designed for trouble free shifting of automatic transmissions.

Harness - The harness includes AMP connectors with gold plated pins that are designed to resist corrosion.
Panel Harness - Single control configuration.
Master Harness - Connects the Panel Harness to the Transmission Station. Available in 5 foot increments up to 55 feet.
Extension Harness - Used to extend the Master Harness of Panel Harness. Available in lengths up to 55 feet.

Transmission Station (Shifter) -
Bolts right up to your Allison Transmission. Just connect the Master Harness and air supply. Available in 12 or 24 volt.

Range Selector Control -
The Range Selector Control features a bright LED indicator that brightens in daylight and dims at night for easier readability. Control has an industrial toggle switch for upshifting and downshifting of the transmission. Available in 12 or 24 volt systems.

Accessory Box Features and Options -
NEUTRAL - OFF - MODULE prevents voluntary engine shutdown in any range other than neutral. This is a neutral-safety switch backup and assures that the bus will be started in neutral. Reverse or Neutral Relay - Reverse relay may be used to control backup horns, light and cameras. Neutral relay may be use for engine speedup.

Shifter Kit for Allison 740
Shifter Kit for Allison 740

Shifter Kit for Allison V730
Shifter Kit for Allison V730

Shift Kit for Allison MT643/644/647/653
Shifter Kit for Allison MT643/644/647/653

Typical Transmission Station installation on Allison 740
Transmission Station (Shifter) typical installation on a Allison 740

Range Selector available in 12 or 24 volt

LED indicator brightens in daylight and dims at night for easier readability.
Range Selector Control available in 12 and 24 volt


Bennett warrants only that equipment of its own manufacture is free from defects in material and workmanship. This warranty shall be effective upon proper installation of equipment, and shall under no circumstance, extend beyond a period of twelve months from delivery of equipment of purchaser. Bennett's liability under the afore said warranty is limited to replacing or repairing at its plant defect of material or workmanship as are reported to within the warranty period; this warranty shall not apply where the equipment has been altered or used negligently or for other than the manufacturer's intended use, and under no circumstances shall Bennett be liable for consequential damages. There are no other warranties, written or oral, expressed or implied, which extend beyond the description on the face hereof.

Bennett policy is one of continuous improvement and reserves the right to make changes without notice.

Please call or email us for a price quote. Email - thallusa1st@gmail.com
Include your shipping address, make/model of coach, transmission and 12 or 24 volt.

Coach Conversion Central
Bennett Dealer
Sacramento, CA 95838
916 929-3815
Email: thallusa1st@gmail.com
Web address - http://users.cwnet.com/~thall

visalogo.gif (516 bytes)mclogo.gif (1162 bytes)

Back • Air Throttle • Gear Sleeve • Stone Bennett Shifters • Design